 |
|
|
| IC Devices: Full-Speed Slave Devices: FT2232D
|
|
| Back to parent category
|
Displaying products 1 to 1 (of 1)
|
|
FT2232D
|
|
The FT2232D is an updated version of FTDI’s 3rd generation USB UART / FIFO I.C. family.This device features two Multi-Purpose UART / FIFO controllers which can be configured individually in several different modes. As well as a UART interface, FIFO interface and Bit-Bang IO modes of the 2nd generation FT232BM and FT245BM devices, the FT2232D offers a variety of additional new modes of operation, including a Multi-Protocol Synchronous Serial Engine interface which is designed specifically for synchronous serial protocols such as JTAG, I2C, and SPI bus.
Main Features are as follows -
* Single chip USB to dual channel serial/parallel ports with a variety of configurations
* Entire USB protocol handled on the chip: no USB-specific firmware programming required
* FT232BM-style UART interface option with full handshaking & modem interface signals
* UART interface supports 7/8 data bits, 1/2 stop bits and Odd / Even / Mark / Space / No Parity
* Data transfer rate of 300 Baud to 1M Baud (RS232)
* Data transfer rate of 300 Baud to 3M Baud (TTL and RS422/RS485)
* Auto transmit enable control for RS485 serial applications using TXDEN pin
* FT245BM-style FIFO interface option with bi-directional data bus and simple 4-wire handshaking interface
* Data transfer rate up to 1M Byte/second
The FT2232D is fully pin to pin compatible with the previous FT2232C and FT2232L devices. In addition to supporting all of the FT2232C / FT2232L functionallity, the FT2232D has an additional interface mode, CPU FIFO mode, and is specified for -40 to +85 degrees C operating temperature range.
The FT2232D is available in Pb-free (RoHS compliant) compact 48-Lead LQFP package.
|
|
|
|
| Page no. |
|
|
|
|
|
| |
Powered by  - Safe, Secure Shopping |
|