 |
|
|
| RF Modules: DLP-RFID1, DLP-RFIDTAG
|
|
| Back to parent category
|
Displaying products 1 to 8 (of 8)
|
|
DLP-RFID1
|
|
The DLP-RFID1 is a low-cost, USB-powered module for reading and writing ISO 15693, ISO 18000-3, and Tag-it™ passive RFID transponder tags. It has the ability to both read and write up to 256 bytes of data in addition to reading the unique identifier (UID).
All of the DLP-RFID1’s electronics and antenna reside inside the unit (3.25” x 2.3” x .83”), and all operational power is taken from the host Windows/Windows CE/Linux/Mac PC via the USB interface. The range of the internal antenna is from 2-4 inches depending upon the size of the transponder tag.
Each DLP-RFID module - pack includes a selection of 11 different RFID tags.
FEATURES:
• ISO 15693, 18000-3, Tag-it™ HF-I Compatible
• Read UID/SID of Up to 15 Tags Simultaneously
• 13.56MHz Reader/Writer
• Built-in Antenna: Up to 4-Inch Read Range
• FCC/IC/CE Modular Approval in Place
• Permanent Unique Serial Number Accessible Via USB
• Integrated Pass/Fail Beeper
• USB Port Powered from Host PC (USB 1.1/2.0 Compatible)
• USB Drivers Provided for Windows XP, XPx64, Server2003, 2000, 98, ME
• Software Development Library Support for Visual C++/Visual Basic
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFIDTAG - pack of 10
|
|
Pack of 10 DLP-RFIDTAG.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFIDTAG - pack of 100
|
|
|
Pack of 10 DLP-RFIDTAG.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFID1-OG
|
|
OEM version.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFID1-OG - pack of 10
|
|
|
Pack of 10 DLP-RFID1-OG.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFID-LP8C
|
|
8-Channel Reader/Writer
The DLP-RFID-LP8C is a low-cost, USB-powered module for reading from and writing to ISO 15693, ISO
18000-3 and Tag-it™ intelligent RFID transponder tags via up to eight external antennas. It has the
ability to both read and write up to 256 bytes of data in addition to reading the unique identifier (UID/SID).
All of the DLP-RFID-LP8C’s electronics reside on a single, compact PCB; and all operational power is
taken from the host Windows/Windows CE/Linux PC via the USB interface. Up to eight external
antennas can be connected via standard SMA connectors.
FEATURES:
• ISO 15693, 18000-3, 14443, Tag-it™ HF-I Compatible
• Can read the UID/SID of up to 15 Tags Simultaneously
• 13.56MHz Reader/Writer
• 8 Channels for External Antenna Connections
• FCC/IC/CE Modular Approvals in Place
• USB Port Powered from Windows, CE or Linux PC
• Both USB and RS232 Interfaces Provided
• USB Interface; No Driver Development Required for Windows, CE or Linux PC
• Operating Temperatures: 0°C to 70°C
• Dimensions: (L x W x H) 4.36” x 3.32” x 0.6”
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-RFID-ANT
|
|
The DLP-RFID1-LP8C is approved for use with selected external antennas. Connection is made via reverse-polarity SMA connectors.
Two different antennas are available from DLP Design: the DLP-FANT and the DLP-RFID-ANT.
The DLP-RFID-ANT ships with an attached 15-foot coax cable with a reverse-polarity SMA connector and provides up to 4 inches of read range.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
DLP-FANT
|
|
|
The DLP-RFID1-LP8C is approved for use with selected external antennas. Connection is made via reverse-polarity SMA connectors.
Two different antennas are available from DLP Design: the DLP-FANT and the DLP-RFID-ANT.
The DLP-FANT ferrite-based antenna provides a compact footprint for space-constrained applications and provides up to a 1.25-inch read range.
The DLP-FANT requires a coax cable with a reverse-polarity SMA connector at one end for connection to the DLP-RFID-LP8C reader.
This coax cable is available in a 3-foot length from DLP Design under
part number DLP-COAX1.
For live stock updates, please contact sales1@ftdichip.com.
|
|
|
|
| Page no. |
|
|
|
|
|
| |
Powered by  - Safe, Secure Shopping |
|