 |
|
|
| Engineering Tools
|
|
Displaying products 1 to 4 (of 4)
|
|
DLP-FLASH2
|
|
The DLP-FLASH2 is a complete in-circuit debugging and programming solution for Microchip's PIC16Fxx and PIC18Fxx PIC® MCUs. The DLP-FLASH2 can debug all PIC16 and PIC18 targets that support debug mode. It also provides in-circuit serial programming (ICSP) support for FLASHbased
PIC microcontrollers. The DLP-FLASH2 unit is compatible with the CCS PCW debugger or the standalone ICD control software. The PCW debugger is integrated into the IDE of the PCW and PCWH compilers and provides very detailed debugging information at the C level. The standalone ICD control software ships with CCS compilers and allows you to quickly program target chips using ICSP. The ICD control software also facilitates updating the DLP-FLASH2's firmware without having to connect to a unit programmer.
The DLP-FLASH2 allows in-circuit programming of target microcontrollers. All that is needed for unit programming on user target designs is a 6-pin header plus a few support components and power isolation if the target electronics draw in excess of 300mA at 5 volts or operate at a voltage other than 5 volts. The microcontroller can be soldered in place during the manufacturing process and programmed at a later date to ensure that the final product is shipped with the most recent firmware version.
NOTE: The DLP-FLASH2 only works with CCS Software. The MPLAB® IDE is not supported.
** Please note - this device is no longer in manufacture, though limited stock remains available. For live stock updates, please contact sales1@ftdichip.com **
|
|
|
DLP-uCF2321
|
|
The DLP-uCF2321 Target Board is designed to easily connect to the DLP-FLASH2 unit Programmer/Debugger and provide the design engineer with a low-cost hardware platform for developing and testing applications for the PIC18F2321 microcontroller.
SPECIFICATIONS
• Program Memory: 4K x 14
• 2.0-5.5V Operation**
• RAM Size: 512 x 8
• 19 I/O (9x10b Analog)
• EEPROM Size: 256 x 8
• LED Indicator
• Size: 1.31 x 0.89 Inches
** Please note - this device is no longer in manufacture, though limited stock remains available. For live stock updates, please contact sales1@ftdichip.com **
|
|
|
DLP-uCF4420
|
|
The DLP-uCF4420 Target Board is designed to easily connect to the DLP-FLASH2 unit Programmer/Debugger and provide the design engineer with a low-cost hardware platform for developing and testing applications for the PIC18F4420 microcontroller.
SPECIFICATIONS
• Program Memory: 8K x 14
• 2.0-5.5V Operation**
• RAM Size: 768 x 8
• 31 I/O (13x10b Analog)
• EEPROM Size: 256 x 8
• LED Indicator
• Size: 1.92 x 0.89 Inches
** Please note - this device is no longer in manufacture, though limited stock remains available. For live stock updates, please contact sales1@ftdichip.com **
|
|
|
DLP-uCF917
|
|
The DLP-uCF917 Target Board is designed to easily connect to the DLP-FLASH2 unit Programmer/Debugger and provide the design engineer with a low-cost hardware platform for developing and testing applications for the PIC16F917 microcontroller.
SPECIFICATIONS
• Program Memory: 8K x 14
• 2.0-5.5V Operation**
• RAM Size: 352 x 8
• 31 I/O (8x10b Analog)
• EEPROM Size: 256 x 8
• LED Indicator
• Size: 1.92 x 0.89 Inches
** Please note - this device is no longer in manufacture, though limited stock remains available. For live stock updates, please contact sales1@ftdichip.com **
|
|
|
|
| Page no. |
|
|
|
|
|
| |
Powered by  - Safe, Secure Shopping |
|