 |
|
|
| USB Hi-Speed Serial/Hub Module
|
|
Displaying products 1 to 2 (of 2)
|
|
FT-MOD-4232HUB
|
|
FT4232H USB serial/hub module
The FT4232H USB serial/hub module was designed to connect to FTDI’s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host. The module has an FTDI FT4232H USB 2.0 Hi-Speed to UART/MPSSE chip which supports data rates of 40Mb/s and takes care of all USB signaling and protocols. It also features a GL850G USB 2.0 hub controller chip, the functions of which can be customized.
Features:
• Can be used to expand the various Vinculum-II development modules (V2DIPx).
• Can be used as a standalone hub when connected to USB Host (e.g. a PC).
• Provides access to 3 downstream Hi-Speed USB ports.
• Provides access to up to 4 UART interfaces (3V3 levels, 12MBaud) two of which can alternatively be used as 2 Multi Purpose Synchronous Serial interface e.g. I2C, JTAG or SPI via the FT4232H MPSSE mode
• Connection to USB Host via standard type A USB connector.
• Connections to 2 downstream USB slave interfaces via a dual type A connector and 1 via the DIL connector pins.
• Other interfaces are accessed via 36 pin, Dual-In-Line, 0.1” pitch header pins which can be easily connected to most PCB header sockets and ribbon cables.
• Diagnostic LEDs give an indication of which USB ports are being accessed.
• USB Powered or external power input pin available to supply external downstream USB ports.
• Temperature range -40oC to +85oC.
|
|
|
FT-MOD-4232HUB - pack of 10
|
|
|
Pack of 10 FT-MOD-4232HUB
|
|
|
|
| Page no. |
|
|
|
|
|
| |
Powered by  - Safe, Secure Shopping |
|